Folding fitted bed sheets often feels like an impossible and time-consuming task. Most of us used to neglect the entire sheet due to the oddly shaped elastic corners. But if you’re the type that loves a neat sheet, you will definitely dislike unorganized linen. If you have been having issues folding your bed sheets, this guide is for you. In this article, I’ll provide you with top tips that will allow you to fold fitted bed sheets the right way without going through a lot of stress.

Step-by-Step Guide to Folding Fitted Bed Sheets

Step 1: Lay the Sheet Out Flat

Start by laying the sheet out flat on a very large surface. It could be your bed or a table—just make sure it’s a clean and flat area. The elastic corners should be facing upwards, so you can easily access them as you go through the folding process.  The flat position of the sheet must be placed properly to free the sheet from bunches or wrinkles. The sheet must be smooth without any creases or bumps. This is the basis of your folds so it is important to smoothen it now as it will make subsequent folds faster and easier, which will make the final results look neater.

Step 2: Tuck the Corners Inside Each Other

Next, take two adjacent corners from one of the shorter sides of the sheet. Grab one corner in each hand and tuck one corner inside the other. You should see the elastic form a pocket where the corners overlap. Now, you can repeat the same process on the other end of the sheet. By doing this, you essentially align the elastic corners, which makes the sheet easier to manage. Don’t worry if you miss out on this step because it is completely fine to do this later on in the process. The only aim here is to have the corners evenly placed and strengthened together to make it overall easier.

Step 3: Fold the Sheet in Thirds Lengthwise

In order to maintain the fold’s crispness, first of all, take one side and fold it toward the center, and then take the other side and overfold it. Right now, what you have is an elongated rectangle with the elastic edges all lined up. Folding the sheet in three parts is helpful, particularly in large sizes. If you’re the kind of person who pays attention to details where alignment and smoothing of the woven textile is concerned, this part will assist you in folding the sheet perfectly. 

Step 4: Fold the Sheet in Thirds or Quarters Crosswise

Depending on the parameters of your sheet, you can use thirds or quarters as a guide, whichever seems more compatible. A twin sheet of a smaller size can be three-sided. For queen or king sheets, folding in quarters may be the most practical way to go. As you complete the crosswise fold, avoid losing focus on the edges of the folded sheet – the straightness that has to be attained during smoothing out operations. When you’re done, you should be able to store your sheet neatly.

Folding Fitted Sheets for Different Sizes

After you have perfected the skill of folding smaller sheets, then you can progress to large sheets using the same technique you employed in folding smaller sheets. Let’s go!

Twin and Full-Sized Fitted Sheets

Smaller fitted sheets, like twin and full sizes, are much easier to fold compared to their larger counterparts. Employ the same tucking, lengthwise and crosswise folding, steps outlined above. Because of the smaller dimensions of these sheets, they are also easier to manipulate and the job can be done quite fast. The most important thing is to concentrate on the most important part of the operation, which is the installation of the elastic corners.

Queen and King-Sized Fitted Sheets

Because of their additional fabric, folding a queen or king-sized fitted sheet can be a tough task. Nevertheless, using the same method of tucking the corners in and first folding in one direction, and then the other, you will come away with a well-folded item. You may need an extra set of hands to help manage the fabric, especially when dealing with oversized or deep-pocket sheets. Having helper hands can make it easier to smooth out the fabric and align the elastic edges.

Deep-Pocket Fitted Sheets

Deep-pocket fitted sheets are designed for thicker mattresses, which means they often have more fabric to deal with. Because the sheets are bulkier, folding these may be more difficult. However, the folding procedure is the same: corners are tucked, the length is folded, and then the width is folded. The only real difference is that a bit more care is exercised in holding the elastic edges in position so they are flat and in line. If the deep pockets in the sheet are too large when it is folded into thirds, then simply use quarters. It will allow you to create a smaller pack that is simple to keep and arrange in your linen closet.

Conclusion

If you’ve been getting it all wrong, here’s a full guide you can follow as it takes practice and proper technique to fold fitted bed sheets just right. Not only will this save you time, but it will also help keep those sheets in better condition and avoid creases and stress at the same time. No matter if it’s a fitted small twin sheet or a larger king-size sheet that you are folding, the process is identical – tuck the corners in, bring the sides over, and bring the top over. For the best-fitted bed sheets, you can visit our website at LatestBedding to make the right choice today. You are in the right place!